Step 1: Positioning The Speakers - Sony DAV-IS10 Operating Instructions Manual

5.1 micro satellite home theater system
Hide thumbs Also See for DAV-IS10:
Table of Contents

Advertisement

Step 1: Positioning the
Speakers
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (1). It is recommended that the
subwoofer should be placed (2).
Place speakers and subwoofer as illustrated
below.
Front speaker (L)
Center speaker
2
1
1
1
Surround speaker (L)
Tip
• You can also place the subwoofer either side, facing
the listening position.
• When you install the speaker, the speaker face may be
unstable. In this case, use a commercially available
wire clamper or a commercially available tape, etc.,
to secure the speaker cord.
10
US
Subwoofer
Front speaker (R)
1
1
Surround speaker (R)
Using the subwoofer
efficiently
To reinforce the bass sound, place the subwoofer
possible close to a wall.
Close to a wall
Note
• If the subwoofer is to be placed ahead of the front
speaker, the distance should be less than 0.5 m (1.6
ft).*
• You may not get the bass sound efficiently when the
subwoofer is placed outside (3). You need to adjust
the setting of the distance from the listening position.
3
*
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dav-is10/w

Table of Contents