Specifications - Sony HT-AF5 Operating Instructions Manual

Specifications

AUDIO POWER
SPECIFICATIONS
Amplifier section
POWER OUTPUT (rated)
FRONT L + FRONT R
POWER OUTPUT (reference)
FRONT L/FRONT R/CENTER/
SUR L/SUR R
SUBWOOFER
Inputs
Analog
Digital (Coaxial) Impedance: 75 ohms
HDMI Video
Input/Output (HDMI Repeater block)
640 × 480p@60 Hz
720 × 480p@59.94/60 Hz
1280 × 720p@59.94/60 Hz
1920 × 1080i@59.94/60 Hz
1920 × 1080p@59.94/60 Hz
720 × 576p@50 Hz
1280 × 720p@50 Hz
1920 × 1080i@50 Hz
1920 × 1080p@50 Hz
1920 × 1080p@24 Hz
76
GB
108 W + 108 W
(at 3 ohms, 1 kHz,
1% THD)
167 W
(per channel at 3 ohms,
1 kHz)
165 W
(at 3 ohms, 60 Hz)
Sensitivity: 1 V/50 kohms
HDMI Video (3D)
Input/Output (HDMI Repeater block)
1280 × 720p@59.94/60Hz Frame packing
1920 × 1080i@59.94/60Hz Frame packing
1920 × 1080i@59.94/60Hz Side-by-Side
(Half)
1920 × 1080p@59.94/60Hz Side-by-Side
(Half)
1280 × 720p@50Hz Frame packing
1920 × 1080i@50Hz Frame packing
1920 × 1080i@50Hz Side-by-Side (Half)
1920 × 1080p@50Hz Side-by-Side (Half)
1920 × 1080p@24Hz Frame packing
FM tuner section
Tuning range
Antenna (Aerial)
Antenna (Aerial) terminals
Intermediate frequency
AM tuner section
Tuning range
Antenna (Aerial)
Intermediate frequency
General
Power requirements
Area code
CEL, CEK
Power output (DIGITAL MEDIA PORT)
DC OUT:
Power consumption
Area code
CEL, CEK
Power consumption (during standby mode)
87.5 MHz – 108.0 MHz
(50 kHz step)
FM wire antenna (aerial)
75 ohms, unbalanced
10.7 MHz
531 kHz – 1,602 kHz
(9 kHz step)
AM loop antenna (aerial)
450 kHz
Power requirements
220–240 V AC, 50/60 Hz
5 V, 0.7 A MAX
Power consumption
110 W
0.3 W (When Control for
HDMI and S-AIR standby
are set to off)