Asus Lyra Voice Quick Start Manual

Quick
Start Guide
Lyra Voice
Wireless-AC2200 Tri Band
Gigabit Router
BEFORE SETTING
01 If you are preparing to setup
a stand alone router
1 Go to SETUP LYRA VOICE AS ROUTER.
SETUP LYRA VOICE AS A ROUTER
01
Connect First Lyra Voice Node to Modem
Download the free ASUS Lyra app.
1
** Make sure your device supports BLE, Bluetooth
4.0 or above.
Search for
ASUS Lyra app
02 Setting Up Your Lyra Voice Wi-Fi System
1 Launch the ASUS Lyra app on your mobile device, and
follow the instructions.
SETUP WITH LYRA SYSTEM
01 Set up your router
1 Refer to Setup Lyra Voice as Router
WE SUGGEST...
02 If you are preparing to setup
and connect with a Lyra WiFi
system
To be the 1st router of Lyra family.
1
To be the 2nd or 3rd node of Lyra family.
2
2 Unplug the power cable from your DSL modem.
** Remove the battery if it has one.
** If you are using DSL for internet, you will need
a username/password from your internet service
provider (ISP) to properly configure your router.
Modem back
02
Adding Lyra Voice Nodes
1 Launch the ASUS Lyra app and click the "+" icon on the upper
right corner. Choose Add Lyra to current network and follow
the instructions to complete.
Hardware Explanations
Plug the adapter into the DCIN port, and press the power switch.
1
2 The blue LED light will start to spin for about 1~2 minutes, the light bar will then change to a white LED and start
spinning after booting up.
Button Explanations
Mute
Volume down Volume up
Set
3 Connect your modem to any Lyra Voice node
using the network cable provided via the port
labeled "WAN".
4 Power on your modem and check its LED lights
to ensure the connection is active.
Modem back
03
Download the Amazon Alexa App
Download the free Amazon Alexa app from Amazon Appstore, Google Play, or Apple App Store to begin
1
using Alexa on your device.
Amazon Alexa
Add Lyra to current network
WAN PORT
Connect your modem to this port with a network cable.
LAN PORT
Connect your PC to this LAN port with a network cable.
03 If you are preparing to
setup Lyra Voice as a
repeater
Go to SETUP LYRA VOICE AS REPEATER.
1
5 Plug in the power adapter to the Lyra
Voice node and wait until the LED turns to
white and starts spinning to ensure that
your Lyra Voice is ready for setup. The
node connected to the modem directly will
become your primary Lyra Voice node.
03 Amazon Account Linking
1 If you have two or more Lyra
Voices in the same network,
remember to enable your
Amazon account on each
node to enjoy using Amazon
Alexa.