Power Management - Sony PCG-Z505R User Manual

My computer does not shut down
It is best to shut down your computer using the Shut Down command on
the Windows 98 Start menu. Using other methods, including those listed
here, may result in loss of unsaved data. If the Shut Down command does
not work properly, follow these steps:
Restart the computer by pressing Ctrl+Alt+Delete. If this does not
work, slide the power switch forward and hold it for four seconds.
Unplug the computer from the AC adapter and remove the battery
pack from your computer.
My PC card is not working
Make sure the PC card is compatible with Windows 98.
Use the Sony Notebook Setup utility to disable devices you are not
currently using.
When I remove the Memory Stick card, an error message appears.
Insert the card into the slot again and press the Enter key. Wait until the
active application finishes, then remove the card. If the message confirms
eject of the card, click OK.

Power Management

The operating system may become unstable if a lower power state such as
system hibernation is initiated and then changed before the operating
system completely enters the lower power state. To restore the computer
to its normal operating stability, close all open applications, button
forward and hold it there for four seconds or more to completely shut
down the computer.
Troubleshooting
65