Interrupts, error messages, diagnostics and system
alarms
The status and error displays of the CPU 1518-4 PN/DP MFP are described below.
You will find additional information on "Interrupts" in the STEP 7 online help.
You can find additional information on the topics of "Diagnostics" and "System alarms" in the
Diagnostics (http://support.automation.siemens.com/WW/view/en/59192926) function
manual.
4.1
Status and error display of the CPU
LED display
The figure below shows the LED displays of the CPU 1518-4 PN/DP MFP.
①
②
③
④
⑤
⑥
⑦
⑧
Figure 4-1
42
RUN/STOP LED (yellow/green LED)
ERROR LED (red LED)
MAINT LED (yellow LED)
No function
LINK RX/TX LED for port X1 P1 (yellow/green LED)
LINK RX/TX LED for port X1 P2 (yellow/green LED)
LINK RX/TX LED for port X3 P1 (yellow/green LED)
LINK RX/TX LED for port X2 P1 (yellow/green LED)
LED display of the CPU 1518-4 PN/DP MFP (without front panel)
CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)
Manual, 12/2017, A5E40882737-AA
4