Download Print this page
HP Compaq LE1851wt Disassembly Instructions Manual
HP Compaq LE1851wt Disassembly Instructions Manual

HP Compaq LE1851wt Disassembly Instructions Manual

Product end-of-life
Hide thumbs Also See for Compaq LE1851wt:

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP Compaq LE1851wt LCD Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
4
0
0
1
0
0
1
2
0
0
0
0
0
Page 1

Advertisement

loading

Summary of Contents for HP Compaq LE1851wt

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3: Disassembly Sop

    HP LE1851wt disassembly SOP By TPV Dec.-02-2010...
  • Page 4 1.Take off the screws of stand , remove the stand...
  • Page 5 2.Take off the screws of rear cover , remove the rear cover...
  • Page 6 3.Pull out the PIN of lamp...
  • Page 7 4.Pull out the PIN of KEPC cable...
  • Page 8: Remove Bezel

    5.Remove BEZEL...
  • Page 9 6.Pull out the PIN of LVDS...
  • Page 10 7.Take off the power board screws...
  • Page 11 8.Take off the VGA screws...
  • Page 12 9.First : tear off the adhesive tape Second : pull out the connector PIN which connect PWPC and main board Third : take off both boards...