Setting an Extension Port to Use a DSS Console
1.
Under Configuration, click Slot.
2.
Move the mouse pointer over the desired
extension card to display the menu of options.
3.
Click Ous to set the card to out-of-service
status.
4.
Move the mouse pointer over the card again,
then click Port Property.
5.
For DPT Type, set the Type to DSS and assign
the Location No.
6.
Click OK.
7.
Under Extension, click DSS Console.
8.
Select the desired pair extension number from
Pair Extension.
9.
Assign features to flexible buttons as required.
10. Click OK.
11. Under Configuration, click Slot.
12. Move the mouse pointer over the card to display
the menu of options.
13. Click INS to set the card to in-service status.
14. Click Close.
4.1 Programming the PBX
Getting Started for Physical Cards
25