To Set Up A Super Send Group From Channel Inputs - Sony OXF-R3 Operation Manual

3-10 Basic Console Operations

3-10-2 To Set Up a Super Send Group from Channel Inputs

1
1
Press {ACCESS} for the first Channel to be routed
to a Super Send Group (SSG).
2
Make sure {CHANS} is selected on the Select To
Faders panel (fire-up default).
3
Make sure {SUPER SGs 1-8} is selected in the SSG
masters section.
4
At the Routing panel, de-select { L } and { R } .
5
At the same panel, select the SSGs required,
{1/9} and {2/10} in this case.
3-20
Chapter 3 Getting Started
4,8 5 2
6
At the Select To Faders panel (SEL section), select
{SUPER SGs 1-8} , then adjust the Fader to 0dB in
the Central Faders panel.
7
Above the SSG 1 level knob select {MAIN} and its
{ACCESS} .
8
At the top of the Routing panel select { L } .
9
Repeat steps 7 and 8 for SSG 2 but select { R } at
the Routing panel.
10
Repeat steps 1 to 5 for further channels.
6 3 7