Performing Communications Via A Wireless Lan Access Point (Infrastructure Mode); Basic Settings - Sony PEGA-WL100 Operating Instructions (primary manual) Operating Instructions Manual

Performing Communications via a
Wireless LAN Access Point
(Infrastructure Mode)
You can wirelessly access the Internet or perform communications
with other communication device through a wireless LAN access
point.

Basic Settings

Before setting
You first need to input a couple of values to set the wireless LAN access point
you use. Check the following values in advance.
[NetworkID (SSID)]: It is also called ESS-ID or Network Name.
[WEP (Wired Equivalent Privacy)]: It is also called Encryption.
For details, ask your System Administrator. When you have a wireless LAN
access point for your personal use, refer to the operating instructions of the
wireless LAN access point.
Note
The Wireless LAN card uses the 1-11 channels (2.4 GHz band of frequencies). If
your access point uses the 12-14 channels, it is impossible to perform
communications using the Wireless LAN card.
1
Insert the Wireless LAN card in Wireless
Communication Slot of your CLIÉ handheld.
2
Tap the [Prefs] icon on the home screen of your CLIÉ
handheld.
The [Preferences] screen appears.
3
Tap V in the upper right corner of the screen, and
select [Network].
The [Network] screen appears.
14