Page 1
Power / data supply for large-scale Ethernet installations...
Page 2
Power / data supply for large-scale Ethernet installations sPDS-480ca is a power / data supply designed for large-scale Ethernet LED lighting installations using low-voltage fixtures from Philips Color Kinetics. sPDS-480ca includes 7.5 V and 24 V versions to meet the power requirements of different fixtures.
UL Class 2 power supply and Safety Environment Dry Location, IP20 1.8 in 3.0 in (46 mm) (76 mm) * KiNET is the Ethernet lighting protocol from Philips Color Kinetics. 2.9 in 2.3 in (74 mm) (58mm) 18.4 in (467 mm) 19.0 in...
480 watts of output and automatically accommodates input voltages ranging from 100 VAC to 240 VAC. Onboard controls incorporate automatic fixture discovery, addressing, and testing. sPDS-480ca is available in 7.5 V and 24 V versions to meet the power requirements of different fixtures.
Page 5
Light System tiles on a 7.5 V sPDS-480ca. Manager Each sPDS-480ca connects to line power with a standard IEC inlet and power cable, Ethernet Switch which can be secured using a locking clamp located on the back of the device’s housing.
Page 6
Surface Mount A power screwdriver is recommended for surface mounting. 1. Remove the included rack mount handles from their two attached brackets using a Philips screwdriver. Together with the other two included brackets, you will now 16.4 in 18.0 in...
Page 7
Connect the sPDS-480ca to Line Power Connect the IEC power cable to the inlet in the back of the sPDS-480ca. To secure the cord, tighten the locking clamp around the inlet with a Phillips screwdriver. Connect the power cable to line power.
Page 8
Using the sPDS-480ca On-Board Menu sPDS-480ca has a navigable LCD screen with three menu levels. Menu Level Description NET: IP Address ... Displays device’s current IP address sPDS-480ca 7.5 V MAC Address Displays device’s MAC address Network Displays an estimate of network bandwidth currently...
Page 9
Changing an IP Address Each sPDS-480ca comes factory-set with a unique IP address. If necessary, you can change a fi xture’s IP address. To ensure that fi xtures function properly, make sure that the IP addresses of all sPDS-480ca devices within a single installation are unique.
Page 10
Stay On continues running lights even if overheating occurs. To adjust thermal settings: ► 1. Press Select to activate the sPDS-480ca menu. 2. Select Confi gure. 3. Select Thermal Settings. 4. Use the Up and Down buttons to fi nd the desired thermal setting, then press Select.
Replacing Fuses sPDS-480ca has a fuse for each of its ports, protecting each port from excessive current. Always replace blown fuses with the same rated fuse: Device Number of Fuses Replacement Fuse 5 A, 125 V, 5 x 20 fast blow fuse sPDS-480ca 7.5 V...
Page 12
Tel 888.385.5742 DIMand, EssentialWhite, eW, iColor, iColor Cove, IntelliWhite, iW, iPlayer, Optibin, and Powercore are either registered trademarks or trademarks of Philips Solid-State Lighting Solutions, Inc. in Tel 617.423.9999 the United States and / or other countries. All other brand or product names are trademarks Fax 617.423.9998...