Making Layout Prints; Making An Id Photo - Sony DPP-FP85 Operating Instructions Manual

Making layout prints

1
From the CreativePrint menu
(page 19), press g/G/f/F to select
"Layout Print," then press
ENTER.
The Layout Print templates are displayed.
2
Press g/G/f/F to select the desired
template, then press ENTER.
The preview of the selected template is
displayed
3
Select an image.
When you select a template with multiple
images, select an image for each area. For
how to select an image, see step 4 on
page 26. When you select image(s), the
window for adjusting the image is
displayed.
4
Adjust an image.
For how to adjust an image, see step 5 on
page 27. When you adjust an image, the
image is added to the image area.
To add a stamp, see "Superimposing a
stamp" on page 31.
5
Press PRINT.
32 GB

Making an ID photo

1
From the CreativePrint menu
(page 19), press g/G/f/F to select
"ID Photo," then press ENTER.
The window used for setting the height
and width of an ID Photo is displayed.
Tip
You can set a maximum size of 7.0 (width) x
9.0 (height) cm.
2
Press g/G/f/F to select the item
that you want to adjust, and press
ENTER.
• To specify the unit: Select the text box at
the left of the photo frame. You can select
either "cm" or "inch."
• To specify the height: Select the figure box
at the right of the photo frame.
• To specify the width: Select the figure box
in the upper of the photo frame.
3
Press f/F to set the size or unit and
then press ENTER.
4
If you want to specify the other size,
repeat steps 2 and 3.
5
Press g/G/f/F to select
press ENTER.
The window for selecting an image is
displayed.
and