Table of Contents
Advertisement
1.1
SCOPE OF THIS MANUAL
This manual introduces the g20 Developer's Kit, and describes the technical details required by the data terminal equipment user
to successfully integrate the Motorola g20 cellular engine into an original equipment manufacturer (OEM) wireless host device.
With the help of this manual, the user can utilize the Developer's Kit to conduct a full series of test and evaluation procedures
on the g20, as well as perform application development.
We at Motorola want to make this guide as helpful as possible. Keep us informed of your comments and suggestions for
improvements.
You can reach us by email: GSM support-BSH015@email.mot.com.
1.2
WHO SHOULD USE THIS MANUAL
This manual is intended for all members of the DTE OEM integration team who will use the g20 Developer's Kit, including
representatives from hardware, software and RF engineering disciplines.
1.3
DISCLAIMER
This guide provides advice and guidelines to developers. Responsibility regarding how the information is used lies entirely with
the OEM. Statements indicating support provided by, or offered by, Motorola are subject to change at any time.
Motorola reserves the right to make any changes to this manual.
1.4
SAFETY
1.4.1
User Operation
Do not operate your telephone when a person is within eight inches (20 centimeters) of the antenna. A person or object within
eight inches (20 centimeters) of the antenna could impair call quality and may cause the phone to operate at a higher power level
than necessary, as well as expose that person to RF energy in excess of that established by the FCC RF Exposure Guidelines.
IMPORTANT: The telephone must be installed in a manner that provides a minimum separation distance of eight inches (20
centimeters) or more between the antenna and persons in order to satisfy FCC RF exposure requirements for mobile transmitting
devices.
IMPORTANT: To comply with the FCC RF exposure limits and to satisfy the categorical exclusion requirements for mobile
transmitters, the requirements described in the following section must be met.
98-08901C67-O
1.
PREFACE
1
Advertisement
Table of Contents
