Bosch Design; Installation Notes; Assembly - Bosch Rexroth IndraControl VDP 15.3 Operating Instructions Manual

VDP 15.3, 18.3, 21.3 Multitouch

10.1.3 Bosch Design

37
①
Field of vision of the display
Fig. 10-3: Housing dimensions of the operating display VDP 15.3/VDP 21.3 in millimetres,
Bosch design

10.2 Installation Notes

Provide a space of 50 mm on all sides of the device for sufficient cooling and
●
cable routing.
The LED displays on the connector must not be covered.
●
Lay all cable in loops. Use strain reliefs for all cables.
●
Only install the operating display vertically, with a max. deviation of ±45°,
●
measured from the vertical.
Do not lay the CDI cables in parallel to the motor cables or other noise sour-
●
ces as otherwise the CDI connection may be disturbed. Keep as much dis-
tance as possible to noise sources.

10.3 Assembly

Assemble the operating display as follows:
DOK-SUPPL*-VDPXX.3MTBU-IT02-EN-P
Assembly, Disassembly and Electrical Installation
420 mm (VDP 15.3), 552 mm (VDP 21.3)
346 mm (VDP 15.3), 478 mm (VDP 21.3)
1
Bosch Rexroth AG
37
8
56
17/37