Checking The Remaining Time Or The Recording Position; On The Recorder - Sony MZ-R55 Analog PCLink Operating Instructions Manual

3
While observing the level meter in
the display, adjust the recording level
by pressing + (+) or = (–).
Set the level so that it hits the –12dB
at maximum input level.
.
Volume decreases
Note
Adjust the recording level while the
recorder is in standby mode. You
cannot adjust it while recording.
4
Press P again to start recording.
To stop recording, press p.
The recording level control is switched back
to automatic control when you record the
next time.
z
When you record with microphone input,
select the sensitivity with MIC SENS (page
12).
14
increases
Checking the remaining
time or the recording
position
You can check the remaining time, track
number, etc. when recording or during
stop.

On the recorder

DISPLAY REC indicator
1
Press DISPLAY while recording or in
stop mode. Each time you press the
button, the display changes as
follows.
While recording
A
Track number
Track number
1)
Current date
1)
Appears only when the clock is set.
A
B
B
Elapsed time
Remaining time for
recording
1)
Current time