Switching On And Off; Before Using For The First Time; Switching On; Switching Off - Miele K 12010 S-2 Operating And Installation Instructions

Before using for the first time

Packaging material
 Remove all packaging material from
the inside of the appliance.
Protective foil
The stainless steel trim to the interior
shelves and the door shelves has a
layer of protective foil to prevent dam-
age during transportation.
 Carefully remove the protective foil
from the stainless steel trim.
Cleaning
Please refer to the relevant instruc-
tions in "Cleaning and care".
 Clean the inside of the appliance and
the accessories.

Switching on

To enable the temperature to get suf-
ficiently cold inside the appliance, al-
low the appliance to run for a few
hours before placing food in it.
 Turn the On/Off and temperature se-
lector in a clockwise direction away
from the "0" position.
The higher the setting, the lower the
temperature in the appliance.
The appliance will start cooling.
The interior lighting will come on when
the door is opened.

Switching on and off

Switching off

 Turn the On/Off and temperature se-
lector from "1" to "0". You must meet
a little resistance as you do so.
The interior lighting will go out and the
cooling process will be switched off.
Switching off for longer peri-
ods of time

If, during a long absence, the ap-
pliance is switched off but not
cleaned and the door(s) left shut,
there is a danger of mould building
up inside the appliance.
It is essential to clean the appliance.
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
 switch the appliance off,
 disconnect it from the mains,
 defrost the freezer compartment (de-
pending on model),
 clean the appliance and
 leave the door(s) ajar to air the appli-
ance and avoid odours building up in-
side the appliance.
19