Setup Menu - Sony VPL-AW10 Operating Instructions (VPLAW10 and VPLAW15) Operating Instructions Manual

Setup Menu

The Setup menu is used to change the factory preset settings, etc.
Status
Language
Cooling Setting
Standby Mode
Power Saving
46
Sets whether or not the on-screen display is displayed.
Set to "Off" to turn off the on-screen displays except for the menus,
message when turning off the power, and warning messages.
Selects the language used in the menu and on-screen displays.
Available languages are: English, Dutch, French, Italian, German,
Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese,
Chinese (Simplified Chinese), Chinese (Traditional Chinese),
Korean, Thai and Arabic.
Use this item when using the projector at high altitudes.
High: Use this setting when using the projector at an altitude of
1,500 m or higher.
Standard: Use this setting when using the projector at normal
altitudes.
Note
When this item is set to "High", the fan noise becomes slightly
louder since the number of fan rotation increases.
Lowers the power consumption in standby.
When set to "Standard" the power consumption in standby becomes
normal.
When set to "Low", the power consumption in standby mode is
lowered.
Sets the power saving mode.
When set to "On", the projector goes into power saving mode if no
signal is input for 10 minutes. At that time, after the
standby) indicator flashes, it will light in orange and the screen
becomes dark. In power saving mode, the power saving mode is
cancelled if a signal is input or any button is pressed. If you do not
want to set the projector to power saving mode, select "Off".
(On/
? 1
/