About The Preset Memory No - Sony VPL-FE40/FE40L Operating Instructions Manual

• For Aspect, "Aspect" itself or a part of the setting items cannot be displayed on the screen
according to the input signal. Also, "Full 1" and "Full 2," or "Full 1" and "4:3" may become the
same images.

About the Preset Memory No.

This projector has 48 types of preset data for
input signals (the preset memory). When a
preset signal is input, the projector
automatically detects the signal type and
recalls the data for the signal from the preset
memory to adjust it to an optimum picture.
The memory number and signal type of that
signal are displayed on the Infomation menu
(See page 40). You can also adjust the preset
data through the Screen menu.
This projector has 20 types of user memories
for Input-A into which you can save the
setting of the adjusted data for an unpreset
input signal.
When an unpreset signal is input for the first
time, a memory number is displayed as 0.
When you adjust the data of the signal using
the Screen menu, it will be registered in the
projector. If more than 20 user memory
items are registered, the newest memory
always overwrites the oldest one.
See the chart on page 53 to find if the signal
is registered in the preset memory.
Note
For VPL-FE40/FX40/FX41, a part of the
screen is displayed in black when "Aspect" is
set to an option other than " "4:3."
For VPL-FW41, a part of the screen may be
displayed in black when "Aspect" is set to an
option other than "Full 1" or "Full 2."
33
The Screen Menu