Table of Contents
Advertisement
PMW-EX3
Depending on the installation position, this
unit may come into contact with other
accessories mounted on the camcorder, or
interfere with operation of the camcorder.
Be careful when adjusting the installation
angle and the position of the cable.
Installation on the
Camcorder
1
Attach the shoe adaptor to this unit.
Align the hooks of the shoe adaptor
with the grooves of the attachment
ring, insert them into the grooves, and
then turn the shoe adaptor clockwise.
14
Installing on the Camcorder
Note
To remove the shoe adaptor, hold
down the release knob of the shoe
adaptor and turn the shoe adaptor
counterclockwise.
2
Adjust the angle of the shoe adaptor.
The shoe adaptor attachment angle can
be adjusted across the range from 0
degrees (horizontal) to 45 degree. To
change the angle, turn the dial of the
shoe adaptor to loosen it. Adjust the
angle, then turn the dial in the opposite
direction to lock it.
Advertisement
Table of Contents
