Changing Over The Door Handle - Miele F 12011 S-1 Operating And Installation Instructions

 Fit the appliance door from below up
onto the upper hinge pin  and then
close the appliance door.
 Fit the hinge bracket  from below
into the lower door bearing and screw
it on tight.
 The appliance door can be aligned
using the long slots in the hinge
bracket. Ensure that all screws have
been properly tightened.

Changing over the door handle

 Carefully remove the cap  and
stoppers  from the sides.
Be careful not to let the tool slip out
and damage the appliance surface.
 Slide the cover  over to the left and
then insert a suitable plastic or
wooden tool  into the gap on the
right hand side.
 Carefully lever the cover  off.
Installation
53