Bios Utility; Boot Sequence; Setting Passwords - Acer NITRO User Manual

The BIOS utility is a hardware configuration program built into your computer's BIOS.
Your computer is already properly configured and optimized, and you do not normally
need to run this utility. However, if you encounter configuration problems, you may need
to run it.
To activate the BIOS utility, press F2 while the computer logo is being displayed.

Boot sequence

To set the boot sequence in the BIOS utility, activate the BIOS utility, then select Boot
from the categories listed on the top of the screen.

Setting passwords

To set a password on boot, activate the BIOS utility, then select Security from the
categories listed on the top of the screen.
Find Set Supervisor Password and enter a password to enable this feature. Once
you have entered a password for this feature, you may then enable/disable Password
on Boot.
Remember to select F10 to properly save and exit the BIOS utility when you are done
making changes.
B I O S
U T I L I T Y

BIOS utility - 17