Advertisement
7) Press the [OK] key.
To cancel the setting change, press the [BACK/C] key to return to
step 4).
NOTE:Special paper such as thick paper, transparency film, labels, and
postcards can be set for tray 2 and the bypass tray.
Envelopes can be set only for tray 2.
8) Select the paper type that has been set in the tray.
Press the [
] or [
] key repeatedly until the paper type that has
been set appears.
PLAIN
OK?
9) Press the [OK] key.
10) Ensure that the desired paper size is selected.
Press the [
] or [
] key repeatedly until the desired paper size
appears.
LETTER
OK?
•Depending on the selected tray, a selection for "AUTO-AB" and
"AUTO-INCH" may appear.
"AUTO-AB": Select when you have set AB system paper.
"AUTO-INCH": Select when you have set inch system paper.
When the paper system is changed from the inch system to the AB
system or vise versa, the paper type must be designated. Select the
paper type.
•If you have set paper of non-standard size, select "NON STANDARD".
This size can be selected when tray 2 or the bypass tray has been
selected in step 4).
11) Press the [OK] key to terminate the setting.
B. Setting the paper type
and size from the touch panel
(AR-M350/M450, DM-3551/4551)
1) Press the [CUSTOM SETTINGS] key.
The custom setting menu screen will appear.
2) Press the [TRAY SETTINGS] key.
The paper tray selection screen will appear.
TOTAL COUNT
TRAY SETTINGS
3) Select the paper tray for which the setting is to be made.
•If the desired tray is not on the display, use [
display until it appears.
4) Select the paper type and the paper size.
•If TRAY 1 has been selected in step 3:
The highlighted keys indicate the current selections. To change
either type or size or both, touch the desired keys to highlight the
selections.
Paper types
Special papers such as transparency film and labels can be set for tray 2
and the bypass tray.Envelopes can be set only for tray 2.
Paper sizes
•Depending on the selected tray, a selection for "AUTO-AB" and
"AUTO-INCH" may appear.
"AUTO-AB": Select when you have set AB system paper.
"AUTO-INCH": Select when you have set inch system paper.
When the paper system is changed from the inch system to the AB
system or vise versa, the paper type must be designated. Select the
paper type.
•If you have set paper of non-standard size, select
"NON STANDARD SIZE". This size key appears when tray 2 or the
bypass tray has been selected in step 3).
5) Touch the [OK] key to complete the setting.
AR-D13/D14/MU1/DC1 ADJUSTMENTS-2
] or [
TYPE / SIZE
TRAY 1
PLAIN / 8 X11
1 / 2
TRAY 2
PLAIN / AUTO-INCH
TRAY 3
RECYCLED / AUTO-INCH
OK
SIZE
A4
OK
SIZE
A4
] key to scroll the
Advertisement
