Programming - Miele KM 6520 FR Operating And Installation Instructions

Programming

You can adapt the programming of the
cooktop to your personal needs.
Several settings can be altered in
succession.
After accessing programming mode, 
(Programme) and  (Code) and 2
cooking zone indicators will appear in
the timer display.
The programme is shown in the left
hand cooking zone display, and the
code in the right hand cooking zone
display. From programme stage 10 the
numbers appear alternately:  flashes
alternately with .
40
Changing the programming
Calling up programming mode
 With the cooktop switched off press
both the  and  sensor controls
until  appears in the timer display
and 2 cooking zone indicators light
up.
Setting a programme
 First touch the left-hand cooking
zone display and then touch the
relevant number on the numerical
keybank.
A dot will start to flash next to the
number.
 While the dot is flashing, press the
relevant number(s) on the numerical
keybank for the programme number.
Setting the code
 First touch the right-hand cooking
zone display and then touch the
relevant number on the numerical
keybank.
A dot will start to flash next to the
number.
 While the dot is flashing, press the
relevant number(s) on the numerical
keybank for the code.
Saving the settings
 Touch the  sensor until the
indicators go out.