Editing Recorded Mds - Sony MDS-PC2 Operating Instructions Manual

Editing
Recorded MDs
This chapter explains how to edit the
tracks that have been recorded on an
MD.
Z
MENU/NO
H
z
.
m/M
m
Brief descriptions of buttons used to edit
MDs
The buttons below are used to erase, divide, move, or
combine tracks on the MD.
Note
The operation of these buttons is different when naming a track
or MD. For details, see "Naming a Track or MD" on page 34.
MENU/NO button: Press to edit tracks. While editing,
press to cancel editing.
./> buttons: Press to select an editing operation or
track number. You can also use these buttons to specify
points in a track for erasure or track division.
YES button: Press to enter a selection.
m/M buttons: Press to specify the unit (minute,
second, or frame) by which the MD is advanced when
you press ./> repeatedly. You can also use these
buttons to locate the end point of the portion to be erased.
For further details on the function of each button, see the
sections on editing operations.
Note
You can't use the buttons on the remote or the deck while the
deck is controlled by a personal computer. "REMOTE" appears
in the display at this time.
` / 1
YES
– +
X
x
./>
>
+
M
–
29 GB