Adding Fabric Conditioner Or Liquid Starch Separately; Adding Starch Separately - Miele PWM 908 Operating And Installation Instructions

5. Adding detergent
Adding fabric conditioner or liquid
starch separately
 Select the Separate rinse programme.
 Change the spin speed if necessary.
 Add fabric conditioner or liquid starch
to the  compartment. Do not ex-
ceed the maximum level mark.
 Touch the Start/Stop sensor.
It will be automatically dispensed in the
final rinse. At the end of the wash pro-
gramme a small amount of water re-
mains in the  compartment.
30

Adding starch separately

 Prepare the starch solution in accord-
ance with the manufacturer's instruc-
tions on the packaging.
 Select the Starch programme.
 Add the prepared starch to compart-
ment .
 Touch the Start/Stop sensor.
Tip: If starching separately or automat-
ically, thoroughly clean the dispenser
compartment, especially the siphon
tube, regularly.
Dye removers and dyes

Damage due to colour run/dye
removers.
Colour run and dye removers can
cause corrosion in the washing ma-
chine.
Do not use colour run or dye re-
movers in this washing machine.
Only use dyes suitable for use in a
washing machine. The manufacturer's
instructions on the packaging must be
observed.