Playing a Tape
Playing a tape
1
Turn on the amplifier and select the
tape deck position.
2
Press POWER, and press A fully to
open the cassette holder, then load a
cassette.
With the side you
want to play
facing you
3
Set DIRECTION MODE.
To play back
One side only
Both sides continuously
Both decks in succession
1)
The deck automatically stops after playing back
five times.
4
Press H.
The deck starts playing. Adjust the volume
on the amplifier.
Do not press POWER or A while the
tape deck is operating. If you do so,
the tape may be damaged.
To
Press
x
Stop playing
h
Start playback from the
reverse side
Pause
X PAUSE. Press the button
again to resume play.
M or m when the deck
Fast-forward or rewind
is stopped
Take out the cassette
A after stopping playing
Set to
g
1)
s
1)
RELAY
Tips
• Push in PITCH CONTROL to activate the Pitch
Control function and turn the control clockwise to
raise the pitch or counterclockwise to lower it.
You can adjust the pitch during playback on deck A
or normal-speed dubbing (but not during RMS
2)
2)
play
or RMS dubbing
2)
TC-WE675 only
• To play a tape recorded with the Dolby
DOLBY NR to ON (TC-WE675 only) and select
the same position that the tape was recorded in—B
or C.
3)
"Dolby", "HX Pro", and the double-D symbol are
trademarks of Dolby Laboratories.
).
3)
NR, set
7