Sony DVS-9000 User Manual page 262

2
3
Setting the DME wipe position (Positioner)
Use the following procedure.
1
2
3
To return the DME wipe pattern position to the center of the screen
In the <Position> group, press [Center].
262
Basic Procedure for DME Wipe Settings
In the <Edge> group, select the edge type.
Border: border
Soft Border: soft border
Set the parameters according to the selection in step 2.
• When border is selected
Knob Parameter Adjustment
1 Width Border width
3 Luminance Luminance
4 Saturation Saturation
5 Hue Hue
• When soft border is selected
Knob Parameter Adjustment
1 Width Border width
2 Inner Soft Border inner softness
3 Luminance Luminance
4 Saturation Saturation
5 Hue Hue
In the M/E-1> DME Wipe menu, select HF5 'Modify.'
The Modify menu appears.
In the <Position> group, press [Position], turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 H Horizontal position
2 V Vertical position
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
0.00 to 359.99
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
0.00 to 359.99
Setting values
200.00 to +200.00
200.00 to +200.00