Starting; Charging; Power On; Standby Mode - Pioneer DASH/T3 PLUS Series User Manual

2 Starting

2.1 Charging

To recharge the DASH/T3 PLUS 's built-in battery, connect the power supply
transformer to the power hole interface on the DASH/T3 PLUS.
Power hole

2.2 Power On

Continuous Press the power button for more than 3 seconds to open DASH/T3 PLUS.

2.3 Standby Mode

When DASH/T3 Plus is running, press the power button for 1 seconds to put the
device into standby mode to conserve electricity. The panel backlight is turned off,
and the power button is pressed again to enable backlight and resume normal
operation.
Since the battery charge may drop during delivery,
please charge at least one hour before starting the first
boot.
Do not use I/O interface when charging
17
Power Button