Sony HD100 Operating Instructions Manual page 37

Note
If the remote control no longer operates
your Digital Satellite Receiver after
completing this procedure, use the
controls on the front panel to open the
Remote Control display (see pages 35 and
84). Then repeat the steps in "Setting the
Security Code" to try again.
3
Select a different security code.
The conformation pop-up appears.
4
Press the CODE SET button on the remote control.
The TV FUNCTION indicator flashes.
CODE SET
5
Enter the three digit security code you selected for the
receiver in step 3 above.
6
Press the enter button.
The remote control and Digital Satellite Receiver are now set to a
new security code.
ENTER
7
Select "OK" to save your changes.
The Remote Control display appears.
37