Sony 85P Operating Instructions Manual page 30

Playback
30
Chapter 2 Recording and Playback
For this purpose:
Stop playback
Adjust the audio playback
level
Search while viewing
Inhibit the unit from
outputting text information
(time data, operation mode
indications, etc.) to the
video monitor.
Remove the cassette
Disable the automatic
rewind function
Change the time period
before the unit switches to
standby off mode from stop
mode
Do this:
Press the STOP button.
The unit enters stop mode, and will automatically
switch to standby off mode after 8 minutes.
Use the audio level control on the monitor.
Press and hold either F FWD or REW button to
search at 32 times normal speed in forward or
reverse direction. To return to normal playback
mode, press the PLAY button.
Note
The search picture will not be displayed unless "F.
FWD/REW" under the AUTO EE SELECT menu
item is set to "PB".
Change the menu settings.
See "CHARA. DISPLAY" (page 43) in Chapter 4
"Menu Settings".
Press the EJECT button.
After a few seconds, the tape is unwound from the
head drum and the cassette is automatically ejected.
If a CNT value is shown on the time counter display
(assuming the time data type indicator "COUNTER"
is lit), the CNT value is reset.
Change the menu settings.
See "AUTO REW" (page 42) in Chapter 4 "Menu
Settings".
Change the menu settings.
See "TAPE PROTECTION" (page 46) in Chapter 4
"Menu Settings".