Page 1
Owner's Manual Laser Display Screen Please read the safety information carefully before using the product. SC100 www.lg.com P/NO : MFL67864901 (1302-REV00)
Safety Precautions Safety Precautions Please take note of the safety instructions to prevent any potential accident or misuse of the product. Safety precautions are given in two forms, i.e. Warning and Caution as detailed be- low. WARNING: Failure to follow the instructions may cause serious injury and even death.
Page 3
Safety Precautions When drilling the holes in the wall, make sure you use a drill and a drill bit with the specified size of diam- eter. Ensure that you also follow the in- structions regarding the depth of the holes. - Otherwise, the product may be installed improperly causing safety issues.
Page 4
PREPARATION PREPARATION Accessories Check the accessories provided with the product. The picture may be different from the actual product. Accessories are subject to change without prior notice in order to improve the perfor- mance of the product. New accessories may be added or old ones may be removed. Down 2 rings 12 space steels...
Installation INSTALLATION Fixing the Anchor, Screw CAUTION y Check the material of the wall and the thickness of the finishing. y U se the anchors for wall material of concrete, light concrete, strong natural stone, soft natural stone masonry brick and hallow block that do not crack.
Installation INSTALLATION STEP Attach a paper screen to the place where the screen will be located. (The paper screen helps to easily install the adjustable bracket and bore holes in the wall.) Install the ceiling mounting bracket while aligning the center of the main unit with the center line of the paper screen.
Page 7
Installation T wo people lift the screen up until its bottom edge is level to the magnets at the bottom of the paper screen. Put the screen close to the wall aligning with the loca- tions marked with the tapes and hang the brackets on the rings by carefully pulling it down.
Page 8
Installation CAUTION y If the screen is tilted when pulling it down, the screen may not fix to the bracket and result in damage to the screen. Move the screen in all directions to check whether the screen is securely hung on the rings.
Page 9
Laser Display Adjustment Laser Display Adjustment < Horizontal movement > <Rotation> < Vertical movement > <Tilt> Adjustment Type Function Rotation Screen Horizontality Tilt Screen Verticality Horizontal movement Horizontal location Vertical movement Screen size...