Fault Message At The End Of A Programme - Miele WCR 860 WPS Operating Instructions Manual

Problem solving guide

Fault message at the end of a programme

Problem

Check dosage

Hygiene info: Select
"Maintenance" and
run the "Clean
machine"
programme.
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OK sensor.
72
Cause and remedy
Excessive foam has built up during washing.
 Check the amount of detergent dispensed.
 With automatic detergent dispensing, check the
dosage amount set.
 Observe the instructions on the detergent
packaging and the degree of soiling of the laundry.
 If necessary, reduce the dispensing quantity by
increments of 10 %.
A wash programme using a temperature above 60 °C
has not been run for a long time.
 In order to prevent bacteria and unpleasant odours
building up in the washing machine, run the
Maintenance wash programme using Miele
machine cleaner or a universal powder detergent.