Cleaning The Drawer Front And Glass Lid; Cleaning The Vacuum Chamber And Sealing Bar; Cleaning The Vacuum Adapter - Miele EVS 7010 Operating And Installation Instructions

Cleaning and care
Cleaning the drawer front and
glass lid
 Remove soiling and fingerprints with
a standard domestic glass cleaner or
with a clean, damp microfibre cloth.
 After cleaning, wipe the surfaces dry
using a soft cloth.
Cleaning the vacuum chamber
and sealing bar

Damage caused by liquids.
Liquid getting into the vacuum pump
air intake valve can result in damage
to the vacuum pump.
Take care that liquids do not get into
the air intake valve.
Tip: To make cleaning easier, the seal-
ing bar can be lifted off.
 Remove light soiling immediately us-
ing a solution of hot water and wash-
ing-up liquid applied with a clean
sponge or use a clean, damp mi-
crofibre cloth.
 Remove any residual cleaning agent
with a little clean water.
 After cleaning, wipe the surfaces dry
using a soft cloth.
30

Cleaning the vacuum adapter

 Clean the vacuum adapter with a
clean sponge and a solution of hot
water and washing-up liquid or a
clean, damp microfibre cloth.
 Then dry the vacuum adapter with a
cloth.
 Do not use the vacuum adapter again
until it is completely dry.