SC-F6300 Series
Operator's Guide
Refilling and Replacing Consumables
When to perform
If the remaining ink level is 50 mm
or less:
When a replacement message is
displayed on the control panel
The paper is not cut neatly/Cut
edges are frayed
Performing maintenance when print quality declines
When horizontal lines appear or the colors are wrong
Perform the following sequence until the problems in the print results have improved.
Maintenance
Component to be replaced
A
Ink refill
"Refilling ink" on page 20
U
B
Waste Ink Bottle
"Disposing of Waste Ink" on page 27
U
C
Cutter
U User's Guide (Online Manual)
16