Download Print this page

Specifications; Circuit Diagram - Yamaha AES920 Series Service Manual

Hide thumbs Also See for AES920 Series:

Advertisement

AES920

CIRCUIT DIAGRAM

FRONT
FRONT
PICKUP
VOLUME
REAR
REAR
PICKUP
VOLUME
WIRING
PICKUP SWITCH
(3 position Toggle)
FRONT PICKUP
FRONT + REAR
REAR PICKUP
Shield Wire (BL)
FRONT PICKUP
Shield Wire (BL)
Shield Wire (BL)
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (Where applicable) components may also
contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other
reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.
4
PICKUP
SWITCH
(3 position Toggle)
MASTER
TONE
OUTPUT
GP20-12
REAR PICKUP
FRONT VOLUME
(15A 500KΩ)
WARNING : CHEMICAL CONTENT NOTICE!

SPECIFICATIONS

STANDARD SPECIFICATIONS
Scale Length .............................. 628.0mm
Body-Neck Construction ......... Set Neck
Length ........................................ 995.8mm
Width ......................................... 343.6mm
Net Weight ................................ 4.1kg
COLOR
Body
HB/BL ..................................... Huney Burst/Black
CG/BL ..................................... Chacoal Gray/Black
Neck
MHB/BL ................................. Mahogany Brown/Black
BODY
Material ...................................... Maple + Mahogany
Body Depth ............................... 52mm
FINGERBOARD
Material ...................................... Rosewood
Fingerboard Width ................... 0-F 43.0mm, 12-F 52.5mm
No. of Frets ................................ 22
NECK
Material ...................................... Mahogany
Neck Thickness ........................ 1-F 21.9mm, 12-F 23.9mm
PARTS
Hardware ................................... Nickel Plated
Nut .............................................. Urea
Bridge ........................................ Die-Cast (Nickel)
Strings ........................................ D'Addario
CONTROLS
Volume ....................................... 15A 500KΩ x 2
Tone ........................................... 05A 250KΩ x 1
Pickup Switch ............................ 3 position Toggle Switch
PICKUPS
Front/Rear ................................ Humbucking
Magnet
Front/Rear .............................. Alnico V
to bridge ground
REAR VOLUME
(15A 500KΩ)
BL
Bare Wire
Shield Wire (BL)
Bare Wire
Shield Wire (BL)
CONDENSER
(0.022µF)
MASTER TONE
(05A 250KΩ)
BL
Shield Wire (BL)
OUTPUT JACK
(Open type)
Shield Wire (BL)

Advertisement

loading

This manual is also suitable for:

Aes920 cgAes920 hb