Honeywell Thor VM2 User Manual page 108

Wiring Diagram
See Caution
statement below
Caution: For battery powered vehicles:
must be connected to the vehicle chassis ground.
Caution: For internal combustion engine powered vehicles:
is connected to the vehicle chassis ground, which can also be battery negative.
Fuse Requirements
Warning: For proper and safe installation, the input power cable must be
•
Note: For North America, a UL Listed fuse is to be used.
96
Existing Circuitry on Vehicle
Forklift Battery
Main Switch
+Vo -Vo
Fuse - See
Warning
statement below
+ -
+
-
DC/DC
Power
Supply
connected to a fused circuit on the vehicle. If the supply
connection is made directly to the battery, the fuse should be
installed in the positive lead within 5 inches of the battery's
positive (+) terminal. Use VM3055FUSE (or equivalent) to
install the fuse as shown below:
For all voltages, use the 3A fuse from the kit or a slow blow fuse that has a DC voltage
rating greater than the vehicle input voltage.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
User supplied serial
cable for optional
screen blanking
connection,
see below
Red/White (if present)
Red
Black/White (if present)
Black
Green
Blue
(not connected)
Quick Mount
Smart Dock
COM1 or COM2
Connector
Power
Connector