GE Advantium 120 Quickstart Cooking Manual page 2

Warming/Proofing
NOTE: The WARM feature will keep hot, cooked foods at serving temperature.
Always start with hot food.
STEP 1 Press WARM/PROOF pad.
STEP 2 Turn the dial to select HOLD FOOD WARM. Press the
dial to enter.
STEP 3 Turn the dial to select the oven temperature. Press the
dial to enter.
LOW 140°–160°F
MEDIUM 160°–195°F
HIGH 195°–230°F
STEP 4 Turn the dial to select the level of moisture you want.
Select CRISP or MOIST. Press the dial to enter.
Microwave Features
U S I N G P R E S E T M I C R O W AV E S E L E C T I O N S
STEP 1 Press Microwave COOK, DEFROST or REHEAT pad.
STEP 2 Turn the dial to the option you want to use (such as
Cook By Food Type). Press the dial to enter.
STEP 3 Turn the dial to find the food you want to cook, defrost
or reheat. Press the dial to enter.
STEP 4 Turn the dial to select your next option such as type,
amount, weight and/or size. (The oven will prompt you for
required selections.) Press the dial after each selection.
STEP 5 Press the dial or the START/PAUSE pad to begin cooking.
Food Placement
To ensure consistent and even browning when cooking foods directly on the non-stick metal tray, arrange food as shown. Food can
touch, but should not overlap.
Circular Pattern
(biscuits, cookies)
Cookware Suggestions
I
Place food or oven-safe cookware directly on the non-stick
metal tray when using SPEEDCOOK or BAKE/BROIL.
I
SPEEDCOOK cookware – The non-stick metal tray must be in
place. You can use non-metal casserole dishes, pie plates
and other heat-safe cookware. Place other cookware directly
on top of the metal tray. Never use metal cookware.
I
BAKE cookware – The non-stick metal tray must be in place.
You can use metal muffin pans, cake pans and other metal
cookware. Use the metal rack for 2-level baking. Metal
cookware can be used for BAKE cooking mode.
Tips and Shortcuts
I
If you have entered an undesired selection at any time, press
the BACK pad and re-enter the desired selection. To review
settings anytime during cooking, press the dial.
GE Appliances
GE Consumer & Industrial
Appliances
General Electric Company
Louisville, KY 40225
ge.com
Always use non-stick metal tray
NOTE: The PROOF feature automatically provides the
optimum temperature for proofing. It does not have a
temperature adjustment.
STEP 1
STEP 2
STEP 3
Always use glass tray
M I C R O W AV E E X P R E S S
Use this pad for 30 seconds of cooking time. The oven starts
immediately. Press EXPRESS pad again for additional 30-second
increments of microwave cooking. You can add or subtract
time by turning the dial.
NOTE: Microwave power levels can be adjusted during cooking. Touch the
POWER/TEMP pad. Turn the dial to the desired power level (PL10 is highest
setting). Press the dial to enter.
Side by Side
(meats, poultry)
I
I
Refer to your Owner's Manual for additional cookware
information.
I
I
Place the dough to be proofed in a cooking utensil.
Place in oven and close the door.
Press WARM/PROOF pad.
Turn the dial to select PROOF BREAD. Press the dial
to enter. The oven starts proofing immediately and
displays the elapsed time.
Spoke Pattern
(crescent rolls, breadsticks)
BROIL cookware – The non-stick metal tray must be in place.
Use the metal rack with aluminum tray to broil or toast. Metal
cookware can be used for BROIL cooking mode.
MICROWAVE cookware – The glass microwave tray should
always be in place for any microwave cooking mode. Be
sure to use cookware suitable for microwave cooking. Never
use metal cookware.
To add more cooking time after a cooking cycle is completed,
press START/PAUSE pad when you are prompted to "PUSH
START FOR MORE or REMOVE FOOD".
To repeat the last cooking cycle for multiple batches, press
CLEAR/OFF pad at the end of the cooking cycle. Touch and
hold the prior cooking pad for 3 seconds.
Single Layer
(appetizers)
3840W5C009B
Pub. No. 49-40456 05-05 JR
© 2005 GE Company