Bosch 7736504944 Installation Instructions Manual page 12

Wi-Fi module activation
6.2 Option 2 - Connect using the built-in Hotspot (HT Hotspot)
How to configure Hotspot;
HT Hotspot menu is not displayed in the HMI if the appliance is connected to a
network (SC Scan).
Reset Wi-Fi connection, by selecting RE Reset, as described in section 7.
▶ Use the symbols
▶ Touch the symbol
Define password with more than 8 characters.
▶ Choose the letters and symbols from the list.
▶ Touch the symbol
▶ To save the password use the symbols
▶ Touch the symbol
▶ Touch the symbol
Display shows temperature value.
HT Hotspot option is defined.
▶ Download the "Bosch Water" app, available for Android and IOS for
communication with the water heater, see fig. 2.
Do not open the Bosch Water app.
▶ In the smartphone, go to;
Settings > Wireless and Networks> Wi-Fi.
▶ Select the network named "waterheater-xxxxxx", where "xxxxxx" is the last 6
digits of the "MAC" address.
▶ Write the same password you defined in HT Hotspot menu.
▶ Open the app and follow the instructions.
▶ Use the smartphone to scan the QR code located on the left side of front cover,
see fig. 8.
12
or to select HT Hotspot.
.
, to confirm each letter or symbol.
.
to return to main menu.
or to select END.
6 720 813 648 (2019/03)