Character Trail Settings - 110 - Sony HDS-7100 User Manual

CHARACTER TRAIL Settings – 110
Applying the character trail effect – F1 (CHARACTER TRAIL)
Turning the end of the trail into stardust – F5 (PIXEL)
This provides the effect of pulling out a "tail" from a peripheral
part of the image.
With the second set of soft key indications shown in the
NONLINEAR menu, press F5 (CHARACTER TRAIL) to display
the CHARACTER TRAIL menu.
CHARACT-
ER TRAIL
CHARACTER TRAIL menu soft key indications
The following are some of the operations carried out in this menu.
Use the following procedure.
1
Press F1 (CHARACTER TRAIL).
2
Adjust the parameters for the following items.
Item Setting
"Transition" Nature of
transition and
execution
"Trail" Angle in which tail
is pulled
Use the following procedure.
1
Press F5 (PIXEL), turning it on.
2
Adjust the "PIXEL" parameters.
• Left knob ("Dens"): degree of disappearance of the image
(0 to 100%)
• Center knob ("Rndm"): behavior of tail and amount of
stardust (0 to 100%)
PIXEL
Knob adjustments of parameters
Left ("Trns"): position of beginning of
effect (–8 to +8)
Center ("Expn"): degree of stretching (0 to
100%)
Right ("Angl"): direction of rotation of
effect region (–8 to +8)
Right ("Angl"): direction of tail-pulling
(–100 to 100%)
Chapter 5 Special Effects Operations
5-65