Huawei SUN2000 Series Quick Manual page 9

Battery, energy meter, and autotransformer

Hide thumbs Also See for SUN2000 Series:

2. Power on the SUN2000.

Before turning on the AC switch between the SUN2000 and the power grid, use a multimeter set to

the AC position to check that the AC voltage is within the specified range.

a) Turn on the battery switch between the battery pack and the SUN2000.

b) Turn on the AC switch between the SUN2000 and the power grid.

c) Turn on the DC switch at the bottom of the SUN2000.

d) Perform quick setting over the FusionHome app and add devices.

•

Please set the CT rated current of CCS-WNC-3D-240-MB energy meter according to the actual

rated current of the current transformers.

•

The app screen snapshots provided in this document correspond to FusionHome 2.1.11.300. The

figures are for reference only.

•

The initial password for connecting the inverter WiFi is Changeme

•

The initial password of the installer is 00000a.

•

Use the initial password upon first power-on and change it immediately after login. To ensure

account security, change the password periodically and keep the new password in mind. Not

changing the initial password may cause password disclosure. A password left unchanged for a

long period of time may be stolen or cracked. If a password is lost, devices cannot be accessed.

In these cases, the user is liable for any loss caused to the PV plant.

Communi

Model

cation

Address

CCS-

WNC-

3D-

240-

Table of Contents