HP Indigo Series User Manual page 9

Figure 1-1 shows the main components of the rewinder.
Figure 1-1. Rewinder components
13
1
2
3
4
5
6
7
8
9
10 Dancer arm
11 Ultrasonic sensor
12 Rewinder spindle
13 Web guide
EN
1 2 3
12
Riding roller Prevents wrinkles and electrostatic build-up in the final roll.
Splicing table Used for splicing the web.
Left clamp Holds the substrate in place for splicing.
Tension control panel Controls the tension in the rewinder (see "Using the tension control
panel" on page 8).
Touch screen Operates the rewinder (see "Using the touch screen" on page 5).
Anti-vacuum roller Prevents vacuum build-up between the moving web and the splicing
table.
Right clamp Holds the substrate in place for splicing.
Nip cassette Creates tension in the web before it is rolled on the rewinder spindle.
Alignment roller Used for aligning the printing engine and the rewinder.
Keeps the web taut between the printing engine and the rewinder.
Stops the rewinder when the final roll reaches the maximum size.
Removes substrate.
Compensates for lateral web movement.
4 5 6
11
7
8
9
10
Overview 3