Using An Optional Battery Pack - Sony Glasstron PLM-A35E Operating Instructions Manual

Personal lcd monitor
Hide thumbs Also See for Glasstron PLM-A35E:
Table of Contents

Advertisement

Available languages

Available languages

Using an optional battery pack

If you use a battery pack such as the NP-F550/F750/F950, you can use the Glasstron without
connecting to mains.
Charge the battery pack before use by using the optional battery charger, BC-V615. You cannot
charge the battery pack while it is on the unit.
1
Slide the BATT/COVER RELEASE button to remove the cover.
When not using the unit, keep the cover
on the power supply box.
2
Attach the battery pack to the power supply box.
Install the battery pack properly making
sure it is not crooked against the power
supply box.
To remove the battery pack, slide and
hold the BATT/COVER RELEASE
button and pull the battery pack off.
Battery pack
NP-F550
* The above indications are for fully charged
batteries.
* Actual battery life depends on conditions of
use.
* You can also use a battery pack such as the
NP-F530/F730/F750/F930/F950 (not
supplied) with the Glasstron.
* You can use an "InfoLITHIUM ™ " battery
pack with the Glasstron. When using such a
battery pack, the estimated remaining battery
life is displayed with the indicator instead of
the time counter.
20
-GB
BATT/COVER RELEASE
button
BATT/COVER RELEASE
button
Battery life
Approx. 7 hours
Power supply box
Notes
• While using the battery pack, if you connect
or disconnect the AC power adaptor, the
power turns off. To turn the power on, press
the POWER ON/OFF switch again.
• If the POWER lamp flashes while using the
battery pack, replace the battery pack with a
fresh one.
• Battery life may be shorter in a cold
environment. This is a typical battery
characteristic.
"InfoLITHIUM" is a trademark of Sony
Corporation.
Battery pack

Advertisement

Table of Contents
loading

Table of Contents