Removing The Front Fork Legs; Installing The Front Fork Legs - Yamaha FZS600 2002 Supplementary Service Manual

FRONT FORK
EB703100

REMOVING THE FRONT FORK LEGS

The following procedure applies to both of the
front fork legs.
1. Stand the motorcycle on a level surface.
WARNING
Securely support the motorcycle so that
there is no danger of it falling over.
NOTE:
Place the motorcycle on a suitable stand so
that the front wheel is elevated.
2. Loosen:
S upper bracket pinch bolt 1
S cap bolt 2
S lower bracket pinch bolt 3
WARNING
Before loosening the upper and lower
bracket pinch bolts, support the front fork
leg.
3. Remove:
S front fork leg
EB703710

INSTALLING THE FRONT FORK LEGS

The following procedure applies to both of the
front fork legs.
1. Install:
S front fork leg
Temporarily tighten the upper and lower
bracket pinch bolts.
NOTE:
Make sure that the inner fork tube is flush
with the top of the handlebar holder.
2. Tighten:
S lower bracket pinch bolt 1
S cap bolt 2
S upper bracket pinch bolt 3
Lower bracket pinch bolt
Cap bolt
Upper bracket pinch bolt
WARNING
Make sure that the brake hoses are routed
properly.
–41–
CHAS
30 Nm (3.0 mSkg)
23 Nm (2.3 mSkg)
30 Nm (3.0 mSkg)