Summary of Contents for Siemens SIPLUS RIC IEC on S7
Page 1
I IA CE SIPLUS RIC IEC on S7 AddOn Nodal Blocks Version V1.5...
Page 2
SIMATIC, SIMATIC HMI, SIMATIC NET, SIROTEC, SINUMERIK and USS are registered trademarks of Siemens AG. Any other names used in this document may be brand names, the use of which by third parties for their own purposes may infringe the rights of the legal owners.
Page 3
WARNING Siemens products may only be used for the applications indicated in the catalog and in the relevant technical description. If third-party products and components are used, these must be recommended or approved by Siemens. To ensure trouble-free and safe operation of the products, they must be appropriately transported, stored, assem- bled, installed, commissioned, operated and maintained.
IEC nod with the software SIPLUS RIC Application IEC on S7 V1.5. The present description has to be perceived as a supplement of the SIPLUS RIC IEC on S7 manual V1.5. You’ll receive the blocks in the form of a SIMATIC block library.
The FB161 and FB166 blocks described here are application blocks performing Master as well as Slave functions. For more detailed information about Slave and Master blocks we refer you to the SIPLUS RIC IEC on S7 manual V1.4. Notice! All application blocks are designed exclusively for the OB1 priority level.
IEC-Slave. MAoSLi_MD_pDB MD is the abbreviation for Monitoring Direction. This is the signaling resp. monitoring direction (subordinated Station SIPLUS RIC IEC on S7 control station) MAoSLi_MD_pDB pDB is the abbreviation for parameterizable by DB (option) The available MAoSLi-functional blocks are shown in the following overview.
SLoMAi_CD_pDB CD is the abbreviation for Command Direction, this is the Command resp. control direction (Control center SIPLUS RIC IEC on S7 subordinated station) SLoMAi_CD_pDB pDB is the abbreviation for parameterizable by DB (option) The available SloMAi functional blocks can be seen in the following overview Block Block-No.