LG Touch Me FM37 Owner's Manual page 13

DIGITAL
MUSIC
PLAYER
Installing software
To connect the USB cable
1
Connect one end of the USB cable to the USB port of
the PC and the other to the USB port of MP3 player.
- Check whether both ends are correctly plugged in.
2
If the USB device is normally recognized after the
cable is connected, the "USB connected" and firmware
version appear on LCD.
3
In case of a correct connection, an icon will be
displayed on the task bar of the PC.
- The icon shapes on the task bar may differ depending on
the OS of the PC.
Note
- The MP3 player may not operate properly because of
other USBs connected to the PC.
- You can not use the touch screen when the USB device
is connected.
To disconnect the USB Cable
Media Device(MTP) mode
Disconnect the USB cable from the PC after checking
whether a file is transferring.
If the file is transferring, disconnect it after the transfer is
completed.
Removable Disk(MSC) mode
This feature is to safely remove MP3 player from the PC
after uploading or downloading the files.
1
Double-click on the Remove Hardware
task bar of the PC.
2
Click [Stop] when the window appears.
3
Click [OK].
4
After a message that the large-capacity USB storage
can be safely removed is displayed, remove MP3
player from the PC.
- If the USB cable is disconnected while storing or delet-
ing the file, the data may get lost.
13
icon on the