Gprs Setting; Reset Settings; Memory Staus - LG KG220 User Manual

Settings
Band selection
EGSM/DCS
According to depending on Network situation, you
can select EGSM/DCS.
PCS only
According to depending on Network situation, you
can select PCS only.

GPRS setting

You can set the GPRS service depending on various
situations.
Switch on
If you select this menu, the phone is automatically
registered to a GPRS network when you switch the
phone on. Starting a WAP or PC dial-up application
created the connection between phone and network
and data transfer is possible. When you end the
application, GPRS connection is ended but the
registration to the GPRS network remains.
66
When needed
(Menu 9.5.2)
If you select this menu, the GPRS connection is
(Menu 9.5.2.1)
established when you connect a WAP service and
closed when you end the WAP connection.
(Menu 9.5.2.2)

Reset settings

You can initialise all factory defaults. You will need
the Security code to activate this function.
Menu 9.6 Memory status
You can check the status of memory in use.
(Menu 9.6.1)
(Menu 9.6.2)
Menu 9.7
Menu 9.8