Normal Mode - Siemens BT 200 Manual

BT 200

3 Normal Mode

The BT 200 is turned on with the ON/OFF
button.
Keep the ON/OFF button pressed until you
see a reaction on the display.
Standby display
The following display appears for approx. 2
seconds after the device is turned on.
Battery display
The battery capacity display is then shown for
approx. 2 seconds.
Operational display
After the battery display disappears, the BT
200 assumes normal mode and displays the
start screen for the wiring test.
Only the wiring test can be performed in nor-
mal mode.
When the BT 200 is in log mode (the cursor
looks different), an extra screen appears after
each test.
Energy saver mode
If no keys are pressed for approx. 3 minutes
and no measurements are being performed,
the BT 200 goes off automatically.
(S)J31069-D0075-U001-A2-6318
04/00 English
Page 5