Wiring; Installation At Operating Unit Of Scissor Lift (Suggestion 3); Fitting - Bosch FWA 4650 Manual

en 48 | FWA 4650 | Mechanical and electrical installation
1. Choose a fitting location on the cross member.
2. Mark holes (1 x each) on both fastening strips in
accordance with the drilling pattern.
i
Refer to Section 5.1.1 Fitting, Fig. 5 for the drilling
pattern.
3. Drill 2 holes.
i
Holes:
Diameter
9 mm
Tab. 14: Holes (2 x) for attaching WLAN-Box
4. Place the WLAN-Box in position.
5. Insert hexagon socket countersunk bolts
(2 x M 8 x 2.5 mm) through the fastening strips (2 x)
of the WLAN-Box and through the holes (2 x) in the
cross member.
6. Fit the hexagon socket countersunk bolts with hexa-
gon nuts (2 x M 8).
"
This completes fitting of the WLAN-Box.
5.2.2

Wiring

i
Refer to Section 5.1.2 Wiring.
"
This completes electrical installation of the
FWA 4650.
|
1 690 706 220 2014-01-31
Spacing
620 mm
5.3 Installation at operating unit of
scissor lift (suggestion 3)
5.3.1

Fitting

i
WLAN-Box fitting procedure for scissor lift.
1
2
3
Fig. 12: Suggestion 3 for fitting WLAN-Box on scissor lift
1 WLAN-Box
2 Cover for scissor lift hoses and cables
3 Operating unit
1. Choose a fitting location on the operating unit.
2. Mark holes (1 x each) on both fastening strips in
accordance with the drilling pattern.
i
Refer to Section 5.1.1 Fitting, Fig. 5 for the drilling
pattern.
Diameter
9 mm
Tab. 15: Holes (2 x) for attaching WLAN-Box
3. Drill 2 holes.
4. Place the WLAN-Box in position.
5. Insert hexagon socket countersunk bolts (2 x M 8
x 2.5 mm) through the fastening strips (2 x) of the
WLAN-Box and through the holes (2 x) in the opera-
ting unit.
6. Fit the hexagon socket countersunk bolts with hexa-
gon nuts (2 x M 8).
"
This completes fitting of the WLAN-Box.
5.3.2 Wiring
i
Refer to Section 5.1.2 Wiring.
"
This completes electrical installation of the
FWA 4650.
Spacing
620 mm
Robert Bosch GmbH