Advertisement
INSTALLATION INSTRUCTIONS
Install clip over subfloor.
Screw in to adjust to height
of flooring or carpet.
Beautiful flush fit every time!
WARRANTY: Thomas & Betts sells this product with the understanding that the user will perform all necessary
tests to determine the suitability of this product for the user's intended application. Thomas & Betts warrants that
this product will be free from defects in materials and workmanship for a period of two (2) years following the
date of purchase. Upon prompt notification of any warranted defect, Thomas & Betts will, at its option, repair or
replace the defective product or refund the purchase price. Proof of purchase is required. Misuse or unauthorized
modification of the product voids all warranties.
Limitations and Exclusions: THE ABOVE WARRANTY IS THE SOLE WARRANTY CONCERNING THIS PRODUCT,
AND IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE
SPECIFICALLY DISCLAIMED. LIABILITY FOR BREACH OF THE ABOVE WARRANTY IS LIMITED TO COST OF
REPAIR OR REPLACEMENT OF THE PRODUCT, AND UNDER NO CIRCUMSTANCES WILL THOMAS & BETTS BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
WARNING
RISK OF SHOCK, DISCONNECT
POWER BEFORE INSTALLATION.
This floor box is designed to be mounted on
a joist or subfloor. It can be installed on the
top of the joist or from the bottom if the
thickness of the joist is sufficient to allow
installation of the box. If the unit is to be
installed from the bottom of the joist, check
prior to installation to ensure there is
sufficient adjustment remaining as this type
of installation is non-standard.
The unit can also be installed using the old
work (small) bracket that is included. This
bracket facilitates the installation of the box
in areas where the larger new work bracket
cannot be used. The old work bracket edge
is hidden by the cover when installed.
However, before cutting into the wood, you
must ensure that the mounting screws will
properly support the bracket/box installation.
For planning purposes please ensure that
the maximum installed height to the bottom
of the cover does not exceed 1-3/4" above
the top of the mounting bracket.
The kit is listed as a floor box by
Underwriters Laboratories. The kit also has a
two (2) hour fire classification. Only covers
manufactured for this box can be used with
this assembly.
Floor box kit should be installed by a
certified electrician.
Advertisement
