Table of Contents
Advertisement
6 ACTUAL VALUES
S VOLTAGE
S [ENTER] for more
SYSTEM LINE-TO-LINE
VOLTAGE: 0.00 kV
VOLTS-PER-HERTZ:
0.00 V/Hz
LINE-NTRL VOLTAGE:
0.00 kV at
0°Lag
The 745 measures current demand on each phase of each monitored winding. These parameters can be mon-
itored to reduce supplier demand penalties or for statistical metering purposes. Demand is calculated based on
the measurement type in S2 SYSTEM SETUP/DEMAND METERING. For each quantity, the 745 displays the demand
over the most recent demand time interval, the maximum demand since the last date that the demand data
was reset, and the time and date stamp of this maximum value.
S DEMAND
S [ENTER] for more
a) DEMAND DATA CLEAR
S DEMAND DATA CLEAR
S [ENTER] for more
CLEAR MAX DEMAND
DATA? No
DATE OF LAST CLEAR:
Jan 01 1996
TIME OF LAST CLEAR:
00:00:00.000
GE Power Management
This message indicates the start of the Voltage actual values. To view these
actual values press
E N TE R
This message displays the system's line-to-line voltage. For phase-to-
neutral input voltages, this display is converted to its line-to-line equivalent.
This message displays the calculated volts-per-hertz.
This message displays the line-to-neutral phase voltage magnitude and
angle.
This message indicates the start of the Demand actual values. To view these
actual values press
E N TE R
This message indicates the start of the Demand Data Clear actual values. To
view these actual values press
Enter Yes to clear all maximum demand data.
This message displays the last date that the demand data was cleared. If the
date has never been programmed, this message will display Jan 01 1996 .
This message displays the last time that the demand data was cleared.
745 Transformer Management Relay
or press
for the next section.
M E SSA G E
or press
for the next section.
M E SSA G E
or press
E N TE R
M E SS AG E
6.3 A2 METERING
6.3.6 VOLTAGE
6.3.7 DEMAND
6
for the next section.
6-9
Advertisement
Table of Contents
