ABB ACQ580-01 Quick Installation And Start-Up Manual page 25

This guide describes how to start-up the drive using the Set-up assistant on the HVAC
To give the drive a name that will be shown at the
top, press .
If you do not want to change the default name
(ACQ580), continue by pressing
For information on editing text, see ACQ580 pump
control program firmware manual
(3AXD50000035867 [English]).
Hint: Name the drive, for example, Pump 1.
Refer to the motor or pump nameplate for the following nominal value settings of the motor.
Enter the values exactly as shown on the motor or pump nameplate.
Example of a nameplate of an induction (asynchronous) motor:
ABB Motors
3 motor
M2AA 200 MLA 4
IEC 200 M/L 55
Hz kW
V
690 Y 30
50
400 D 50 30
660 Y 50
30
380 D 30
50
50
415 D 30
440 D 35
60
Cat. no
3GAA 202 001 - ADA
6312/C3
Check that the motor data is correct. Values are
predefined on the basis of the drive size but you
should verify that they correspond to the motor.
Start with the motor type.Go to the edit view of a
selected row by pressing
• Scroll the view with
Motor nominal cosΦ and nominal torque are
optional.
Press (Next) to continue.
Adjust the limits according to your needs.
• Go to the edit view of a selected row by
pressing .
• Scroll the view with
Go to the next view by pressing
(Next).
No
Ins.cl. F
IP 55
IA/IN t E/s
r/min A
cos
1475 32.5 0.83
56
1475 0.83
1470 34 0.83
1470 59 0.83
1475 54 0.83
1770 59 0.83
6210/C3 180
IEC 34-1
.
and .
and .
(Next).
R0-
R4
R1-
R9
EN
DE
ES
FI
FR
RU
SV